DIEDRICH
D-120 DRILL PRICE LIST |
| |
| D-120 with a 120 HP Deutz F6L-914 395 cu.in. 6-cyl air-cooled
diesel engine |
| D-120 with a 115 HP John Deere 6068 275 cu.in. 4-cyl
Turbocharged diesel engine |
| D-120 with a 123 HP Cat 4.4 Acert 268 cu.in.
4-cyl Turbocharged diesel engine |
|
| Cold weather start for diesel engine |
| includes: |
| Heavy-duty universal joint to DDI auger or 2" Hex
box |
| Two section hydraulic pump |
| High-torque/high RPM two-speed grea-driven rotary box |
| 3-1/2" ID open spindle |
| Hydraulic oil cooler |
| Split bushings (quick change) on feed cylinders |
| Choice of standard paint colors |
| Drill engine hour meter, oil-amp-temp gauges |
| Loackable battery box |
| OPTIONAL EQUIPMENT |
| MAST (includes quick disconnect) |
20 ft from base of frame to sheave |
24 ft from base of frame to sheave |
|
29 ft. from base of frame to sheave |
Underside sheave |
|
Hinged sheave |
| CATHEAD
- 8" diameter |
| HOIST (includes cable) |
Hydraulic (w/brake) 2000# capacity |
Hydraulic (w/brake) 3000# capacity |
Hydraulic (w/brake) 5000# capacity |
Hydraulic (w/brake) 6000# capacity |
Hydraulic (w/brake) 7000# capacity |
|
Hydraulic (w/brake) 10000# capacity w/high speed reverse |
|
Hydraulic (wireline) 900# capacity |
|
Hydraulic 6000# with brake release |
| HYDRAULIC SLIDE BASE |
| HYDRAULIC SIDE TO SIDE SLIDE |
| WATER PUMP ASSEMBLY |
Progressive Cavity 3L6 (w/2-speed motor) |
|
Progressive Cavity 3L8 (w/2-speed motor) |
|
FMC L0918 (425) |
|
FMC L1122B (435) |
|
SP50 Hose Pump |
|
Standpipe |
| HIGH RISE PUMP MOUNT |
|
Two 36" tool boxes mounted under high rise pump mount |
| WATER TANK |
|
250 gal. capacity |
|
500 gal. capacity |
|
Luggage rack on top of water tank |
| HYDRAULIC LEVELING JACKS |
|
4" X 36" stroke |
|
2 rear |
|
1 front (requires front frame extension and stationary
grill) |
|
1 front - tilt jack with HD bumper(require front frame extension) |
| |
| HYDRAULIC ROD HOLDER & BREAKOUT WRENCH |
|
NW rod to 6" casing |
| |
| AUTOMATIC SPT HAMMER ,( guide tube mount) |
| AUTOMATIC SPT HAMMER (Side cylinder mount) |
| |
| DRILL PLATFORM - includes
running lights and reflectors |
|
(2) underbody tool boxes L & R |
|
(2) above deck auger and rod racks L & R |
|
(1) underbody 10 ft. rod box & tool storage |
|
for 155 to 168" CA trucks |
|
for 120 to 144" CA trucks |
|
for 120" CA trucks |
|
One underbody auger rack and one large tool box in place of
standard tool boxes (3-1/4, 4-1/4, or 6-1/4 HSA) |
|
Two underbody auger racks in place of standard tool boxes
(3-1/4,4-1/4, or 6-1/4 HSA) |
|
Rod rack under water tank |
|
Drillers step |
|
Vertical drop hammer rack |
|
Manual hinged underbody auger rack in place of tool box |
|
Hydraulic underbody auger rack in place of standard tool box
(includes small tool box and bulkhead) |
|
Bulkhead |
|
Tool box 24" |
|
Tool box 36" |
|
Tool box 48" |
| SPINDLE ADAPTER (purchased with new rig) |
|
Upper (NWJ/4-1/4" Box/NWJ) |
|
Lower (4-1/4" Pin/U-joint/1-5/8"Hex) |
| OPTIONAL SAFETY FEATURES AVAILABLE |
| CATHEAD BRAKE |
| CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent
No. 5,647,442) |
iedrich
