DIEDRICH
D-90 DRILL PRICE LIST |
PRICES
ARE FOR EQUIPMENT SOLD WITHIN CONTINENTAL UNITED STATES
ALL
PRICES ARE IN US$ AND SUBJECT TO CHANGE WITHOUT NOTICE |
| D-90 with a 125 HP John Deere 276 cu.in. 4-cyl turbo-charged
diesel engine |
75800.00 |
| D-90 with a 97 HP Deutz
329 cu.in. 5-cyl turbo-charged
diesel engine |
77275.00 |
| Cold weather start for diesel engine |
650.00 |
| includes: |
|
| Heavy-duty universal joint to DDI auger or 2" Hex
box |
|
| Two section hydraulic pump |
|
| Heavy duty triple strand No. 100 chain-driven rotary box |
|
| 3-3/4" ID open spindle |
|
| Hydraulic oil cooler |
|
| Split bushings (quick change) on feed cylinders |
|
| Choice of standard paint colors |
|
| Drill engine hour meter, oil-amp-temp gauges |
|
| Loackable battery box |
|
| OPTIONAL EQUIPMENT |
|
| LOW OVERHEAD CLEARANCE FEED FRAME |
9990.00 |
|
Feed Frame Sheave Mount |
1035.00 |
| MAST (includes quick disconnect) |
|
21 ft from base of frame to sheave |
5825.00 |
26 ft from base of frame to sheave |
6990.00 |
|
Hinged sheave assembly |
825.00 |
Underside sheave |
585.00 |
| CATHEAD
- 8" diameter |
3350.00 |
| HOIST (includes cable) |
|
Hydraulic (w/brake) 2000# capacity |
3985.00 |
Hydraulic (w/brake) 3000# capacity |
4125.00 |
Hydraulic (w/brake) 5000# capacity |
5750.00 |
|
Hydraulic (w/brake) 6000# capacity |
5885.00 |
Hydraulic (w/brake) 7000# capacity |
6010.00 |
|
Hydraulic (w/brake) 10000# capacity w/high speed reverse |
9500.00 |
|
Hydraulic (wireline) 900# capacity |
4500.00 |
|
Hydraulic 6000# with brake release |
6475.00 |
| HYDRAULIC SLIDE BASE |
2650.00 |
| HYDRAULIC SIDE TO SIDE SLIDE |
4095.00 |
| WATER PUMP ASSEMBLY |
|
Moyno 3L6 (w/2-speed motor) |
8475.00 |
|
Moyno 3L8 (w/2-speed motor) |
11150.00 |
|
FMC L0918 (425) |
10800.00 |
|
FMC L1122B (435) |
13100.00 |
|
SP50 Hose Pump |
15795.00 |
|
Standpipe |
450.00 |
| HIGH RISE PUMP MOUNT |
900.00 |
|
Two 36" tool boxes mounted under high rise pump mount |
660.00 |
| WATER TANK |
|
|
250 gal. capacity |
1910.00 |
|
500 gal. capacity |
3175.00 |
|
Luggage rack on top of water tank |
400.00 |
| HYDRAULIC LEVELING JACKS |
|
|
4" X 36" stroke |
|
|
2 rear |
4430.00 |
|
1 front (requires fron frame extension and stationary
grill) |
3110.00 |
|
1 front - tilt jack with HD bumper(requires front frame extension) |
4450.00 |
| HYDRAULIC ROD HOLDER & BREAKOUT WRENCH |
|
|
NW rod to 6" casing |
8775.00 |
| |
|
| AUTOMATIC SPT HAMMER (guide tube mount) |
9115.00 |
| AUTOMATIC SPT HAMMER(Side Cylinder Mount) |
10920.00 |
| |
|
| DRILL PLATFORM - includes
running lights and reflectors |
|
|
(2) underbody tool boxes L & R |
|
|
(2) above deck auger and rod racks L & R |
|
|
(1) underbody 10 ft. rod box & tool storage |
|
|
for 108" CA trucks |
8650.00 |
|
for 120" CA trucks |
9085.00 |
|
for 120" CA to 144" CA (tandem) trucks |
9500.00 |
|
One underbody auger rack and one large tool box in
place of
standard tool boxes (3-1/4, 4-1/4, or 6-1/4 HSA) |
765.00 |
|
Two underbody auger racks in place of standard tool
boxes
(3-1/4,4-1/4, or 6-1/4 HSA) |
1250.00 |
|
Rod rack under water tank |
420.00 |
|
Drillers step |
620.00 |
|
Vertical drop hammer rack |
420.00 |
|
Manual hinged underbody auger rack in place of tool box |
1535.00 |
| Hydraulic underbody auger rack in place of standard tool box
(includes small tool box and bulkhead) |
2400.00 |
|
Bulkhead |
1040.00 |
|
Tool box 24" |
275.00 |
|
Tool box 36" |
330.00 |
|
Tool box 48" |
445.00 |
| SPINDLE ADAPTER (purchased with new rig) |
|
|
Upper (NWJ/4-1/4" Box/NWJ) |
1025.00 |
|
Lower (4-1/4" Pin/U-joint/1-5/8"Hex) |
385.00 |
| Hydraulic chuck or fluted kelly with automatic pulldown
option available |
|
| OPTIONAL SAFETY FEATURES AVAILABLE |
|
| CATHEAD BRAKE |
POR |
| CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent
No. 5,647,442) |
POR |
| DRILLERS SAFETY BARRIER(U.S Patent No.
5,360,072) |
POR |
| ALTERNATE SPINDLE MOTOR(U.S. Patent No,
5,524,713) |
POR |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
iedrich
