5 Fisher St. LaPorte, Ind. 46350.........219-326-7788 or 800-348-8809....Fax:219-324-5962

                   Email: ddijl@diedrichdrill.com
Home

Sales & Service

Drill Rigs

Tooling

Links/Affiliations

Contact Us

Place an Order

    Diedrich Drill 30K Sonic Track Specs

Performance ratings are based on engineering specifications, calculations and accepted industry standards. Capacities may vary according to drilling conditions. Diedrich Drill reserves the right to amend these specifications at any time, without notice

ALL MATERIALS AND PARTS MADE IN USA

ENGINE WATER PUMP
John Deere 6068hf485 Tier 3 FMC Bean Pump Model L0918
6.8 1-200 HP 700 psi @ 20 gpm
   
DIMENSIONS OTHER FEATURES
Length Towered Down - 17'6" 24" Tool Box
Height Towered Down - 9' 73 Gallon Fuel Tank
Length Towered Up -Main Frame In - 17' 4" 140 Gallon Hydraulic Tank
Length Towered Up - Main Frame Out - 18' 3" Radio Controlled Undercarriage
Height Towered Up - Feed Frame Down - 17' Rod Rack Capacity
Height Towered Up - Feed Frame Up - 18' (30) 2-7/8" OD X 5' Rods
Width - 8' 10" Wiggle Tail
  10" Slide Base
   
FEED FRAME WINCH
8" X 8" Structural Steel Tubular Construction Capacity: 2000 lbs
Angle Drilling up to 55 Deg Off Vertical Mounted to Side of Feed Carriage
48" Feed Frame Slide Sheave Attaches to Spindle
   
FEED SYSTEM BREAKOUT WRENCH
4-3/8 Cable System - Cylinder Drive Capacity: 2-3/8 OD - 7-5/8 OD
Pull Back - 15,000 lbs Torque: 12,000 ft. lbs.
Pull Down - 15,000 lbs  
Rubber Isolation Wheels  
9'3" Stroke or 14'3" Stroke 30K SONIC HEAD
  Vibration Frequency: 0-130 Hz
LEVELING JACKS Max Force Output: 30,000 lbs
Four 36" Stroke (2 Front and 2 Rear Max Rotation: 120 rpm

 

                                      

 

Home | Sales & Service | Drill Rigs | Tooling | Links/Affiliations | Contact Us | Place and Order

copyright @ 2010 DDI, Inc. all rights reserved