| OPTIONAL EQUIPMENT |
|
| LOW OVERHEAD CLEARANCE FEED FRAME |
9425.00 |
|
Feed Frame Sheave Mount |
975.00 |
| MAST (includes quick disconnect) |
|
21 ft from base of frame to sheave |
5495.00 |
26 ft from base of frame to sheave |
6595.00 |
|
Hinged sheave assembly |
775.00 |
Underside sheave |
550.00 |
| CATHEAD
- 8" diameter |
3150.00 |
| HOIST (includes cable) |
|
Hydraulic (w/brake) 2000# capacity |
3760.00 |
Hydraulic (w/brake) 3000# capacity |
3885.00 |
Hydraulic (w/brake) 5000# capacity |
5420.00 |
|
Hydraulic (w/brake) 6000# capacity |
5550.00 |
Hydraulic (w/brake) 7000# capacity |
5670.00 |
|
Hydraulic (w/brake) 10000# capacity w/high speed reverse |
8950.00 |
|
Hydraulic (wireline) 900# capacity |
3860.00 |
|
Hydraulic 6000# with brake release |
6100.00 |
| HYDRAULIC SLIDE BASE |
2500.00 |
| HYDRAULIC SIDE TO SIDE SLIDE |
3850.00 |
| WATER PUMP ASSEMBLY |
|
Moyno 3L6 (w/2-speed motor) |
7995.00 |
|
Moyno 3L8 (w/2-speed motor) |
10500.00 |
|
FMC L0918 (425) |
10200.00 |
|
FMC L1122B (435) |
12315.00 |
|
SP50 Hose Pump |
14900.00 |
|
Standpipe |
425.00 |
| HIGH RISE PUMP MOUNT |
850.00 |
|
Two 36" tool boxes mounted under high rise pump mount |
620.00 |
| WATER TANK |
|
|
250 gal. capacity |
1800.00 |
|
500 gal. capacity |
2995.00 |
|
Luggage rack on top of water tank |
375.00 |
| HYDRAULIC LEVELING JACKS |
|
|
4" X 36" stroke |
|
|
2 rear |
4180.00 |
|
1 front (requires fron frame extension and stationary
grill) |
2935.00 |
|
1 front - tilt jack with HD bumper |
4200.00 |
| HYDRAULIC ROD HOLDER & BREAKOUT WRENCH |
|
|
NW rod to 6" casing |
8275.00 |
| |
|
| AUTOMATIC SPT HAMMER (guide tube mount) |
8600.00 |
| AUTOMATIC SPT HAMMER(Side Cylinder Mount) |
10300.00 |
| |
|
| DRILL PLATFORM - includes
running lights and reflectors |
|
|
(2) underbody tool boxes L & R |
|
|
(2) above deck auger and rod racks L & R |
|
|
(1) underbody 10 ft. rod box & tool storage |
|
|
for 108" CA trucks |
8150.00 |
|
for 120" CA trucks |
8570.00 |
|
for 120" CA to 144" CA (tandem) trucks |
8950.00 |
|
One underbody auger rack and one large tool box in place of
standard tool boxes (3-1/4, 4-1/4, or 6-1/4 HSA) |
720.00 |
|
Two underbody auger racks in place of standard tool boxes
(3-1/4,4-1/4, or 6-1/4 HSA) |
1175.00 |
|
Rod rack under water tank |
395.00 |
|
Drillers step |
585.00 |
|
Vertical drop hammer rack |
395.00 |
|
Manual hinged underbody auger rack in place of tool box |
1445.00 |
|
Hydraulic underbody auger rack in place of standard tool box
(includes small tool box and bulkhead) |
2280.00 |
|
Bulkhead |
980.00 |
|
Tool box 24" |
260.00 |
|
Tool box 36" |
310.00 |
|
Tool box 48" |
420.00 |
| SPINDLE ADAPTER (purchased with new rig) |
|
|
Upper (NWJ/4-1/4" Box/NWJ) |
970.00 |
|
Lower (4-1/4" Pin/U-joint/1-5/8"Hex) |
360.00 |
| Hydraulic chuck or fluted kelly with automatic pulldown
option available |
|
| OPTIONAL SAFETY FEATURES AVAILABLE |
|
| CATHEAD BRAKE |
POR |
| CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent
No. 5,647,442) |
POR |
| DRILLERS SAFETY BARRIER(U.S Patent No.
5,360,072) |
POR |
| ALTERNATE SPINDLE MOTOR(U.S. Patent No,
5,524,713) |
POR |