|
|
|
|
DIEDRICH REMOTE CONTROL TRACK CARRIER SPECIFICATIONS DESCRIPTIONThe Diedrich remote control carrier is a rubber track carrier designed to carry the Diedrich D-25 or the D-50 drill rig. The track carrier uses the latest in hydrostatic drive technology resulting in a carrier with low maintenance and high reliability. The carrier is designed to traverse mud, snow, sand, steep slopes, uneven ground and wooded areas.CARRIERThe drill rig engine drives two heavy-duty hydrostatic pumps which power the individual track motors. The track carrier is regulated to 3mph.Tracks are 18" wide heavily reinforced rubber tracks.Steering is hydrostatic skid steer with zero turning radius.A spring applied hydraulically released parking brake is provided.Ground clearance is 16 inches throughout the carrier.The hydraulic system for the drill rig operation is completely disabled for safety while the carrier drive is in operation. When the drill rig is being used for drilling, the hydrostatic drive is completely disabled.Ground contact pressure less tools is 2.3 to 3.5 psi.The unit will negotiate a 60% grade.CARRIER BODYThe carrier body is constructed from structural steel members and 1/8 in. safety tread deck plate.A tool box is supplied on either side of the carrier.An auger storage area is furnished at the front of the carrier.Fenders are provided over and on the inside of the tracks.Optional rod storage and additional tool boxes and/or auger racks are available.HYDRAULIC LEVELING JACKSTwo jacks are furnished for the rear and two for the front of the carrier.Rear jacks are individually controlled from the control panel. Self-leveling front jacks are controlled by a single control lever.CARRIER WINCHA carrier winch is furnished including wire rope and roller guides which allow for winching the carrier in either a forward or reverse direction.D-25 Track Specifications D-25 Track Pricing D-50 Track Specifications D-50 Track Pricing
|