DIEDRICH DRILL,
INC. |
presents the |
TWO -SPEED HYDRAULIC
WATER PUMP DRIVE MOTOR |
| |
| Achieving the
full capacity of the Moyno 3L8 pump requires high rotational speed. |
| Starting the
pump requires high rotational torque. |
| |
You ask, "How
can I get both from the same power source"? |
| |
Diedrich has the
answer. |
| |
| Our
Two-Speed Hydraulic Water Pump Drive Motor connects directly to the |
| pump
input shaft. With just a flick of a switch, this electically controlled system |
| provides low
flows for coring work and high flows for mud rotary or hole flushing. |
| |
No need to stop pump rotation! |
No need to move from one side of the machine to the other just to shift gears! |
It's all done at the control panel! |
| |
| Pump
rotation speeds are 0 to 400 rpm in low range, and 0 to 800 rpm in high. |
| Output
torque in low range is 307.5 ft. lbs. Switch to high and the torque is |
| 154 ft. lbs.
Get the full value from your pump investment. The Two-Speed |
| Hydraulic
Water Pump Drive Motor works with any rotationally driven pumping system. |
| |
Contact us for more
information!! |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|