DIEDRICH D-120 DRILL PRICE LIST

D-120 with a 115 HP John Deere 6068 275 cu.in. 4-cyl Turbocharged diesel engine
Cold weather start for diesel engine
includes:
Heavy-duty universal joint to DDI auger or 2" Hex box   
Two section hydraulic pump
High-torque/high RPM two-speed grea-driven rotary box
3-1/2" ID open spindle
Hydraulic oil cooler
Split bushings (quick change) on feed cylinders
Choice of standard paint colors
Drill engine hour meter, oil-amp-temp gauges
Loackable battery box
OPTIONAL EQUIPMENT
MAST (includes quick disconnect)

                  20 ft from base of frame to sheave

                  24 ft from base of frame to sheave

                  29 ft. from base of frame to sheave

                  Underside sheave

                  Hinged sheave
CATHEAD     -    8" diameter
HOIST (includes cable)

                  Hydraulic (w/brake) 2000# capacity

                  Hydraulic (w/brake) 3000# capacity

                  Hydraulic (w/brake) 5000# capacity

                  Hydraulic (w/brake) 6000# capacity

                  Hydraulic (w/brake) 7000# capacity

                  Hydraulic (w/brake) 10000# capacity w/high speed reverse
                  Hydraulic (wireline) 900# capacity
                  Hydraulic 6000# with brake release
HYDRAULIC SLIDE BASE
HYDRAULIC SIDE TO SIDE SLIDE
WATER PUMP ASSEMBLY

                  Progressive Cavity 3L6 (w/2-speed motor)

                  Progressive Cavity 3L8 (w/2-speed motor)
                  FMC L0918 (425)
                  FMC L1122B (435)
                  SP50 Hose Pump
                  Standpipe
HIGH RISE PUMP MOUNT
                 Two 36" tool boxes mounted under high rise pump mount
WATER TANK
                  250 gal. capacity
                  500 gal. capacity
                  Luggage rack on top of water tank
HYDRAULIC LEVELING JACKS
                  4" X 36" stroke
                   2 rear
                   1 front (requires front frame extension and stationary grill)
                   1 front - tilt jack with HD bumper(require front frame extension)
 
HYDRAULIC ROD HOLDER & BREAKOUT WRENCH
                   NW rod to 6" casing
 
AUTOMATIC SPT HAMMER ,( guide tube mount)
AUTOMATIC SPT HAMMER (Side cylinder mount)
 
DRILL PLATFORM   -   includes running lights and reflectors
                                        (2) underbody tool boxes L & R
                                        (2) above deck auger and rod racks L & R
                                        (1) underbody 10 ft. rod box & tool storage
                    for 155 to 168" CA trucks
                    for 120 to 144" CA trucks
                    for 120" CA trucks
                    One underbody auger rack and one large tool box in place of                        standard tool boxes (3-1/4, 4-1/4, or 6-1/4 HSA)
                    Two underbody auger racks in place of standard tool boxes                       (3-1/4,4-1/4, or 6-1/4 HSA)
                    Rod rack under water tank
                    Drillers step
                    Vertical drop hammer rack
                    Manual hinged underbody auger rack in place of tool box
                    Hydraulic underbody auger rack in place of standard tool box                        (includes small tool box and bulkhead)
                    Bulkhead
                    Tool box 24"
                    Tool box 36"
                    Tool box 48"
SPINDLE ADAPTER (purchased with new rig)
                      Upper (NWJ/4-1/4" Box/NWJ)
                      Lower (4-1/4" Pin/U-joint/1-5/8"Hex)
OPTIONAL SAFETY FEATURES AVAILABLE
CATHEAD BRAKE
CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent No. 5,647,442)

copyright @ 2010 Diedrich Drill, all rights reserved