D-120 TRACK RIG

 

DIEDRICH REMOTE CONTROL TRACK CARRIER SPECIFICATIONS

 

HEAVY DUTY CARRIER

 
Performance ratings are based on engineering specifications, calculations and accepted industry standards. Capacities may vary according to drilling conditions. Diedrich Drill reserves the right to amend these specifications at any time, without notice  
DESCRIPTION:  
The Diedrich heavy duty remote carrier is a rubber track designed to carry the Diedrich D-120/D-90 drill rig. The track carrier uses the latest technology  
resulting in a carrier with low maintenance and high reliability. The carrier is designed to traverse mud, snow. sand, steep slopes, uneven ground and wooded  
areas.  
   
CARRIER  
The drill rig engine drives two heavy duty hydrostatic pumps which power the individual track motors with planetary drives. The track carrier is regulated  
to 2.0 mph in low range and 5.0 mph in high range.  
Tracks are 24" wide heavily reinforced rubber tracks.  
Steering is hydrostatic skid steer with zero turning radius.  
A totally enclosed spring applied, hydraulically released multi-disk parking brake is provided.  
The hydraulic system for the drill rig operation is completely disabled for safety while the carrier drive is in operation. When the drill rig is being used for  
drilling, the hydrostatic drive is completely disabled.  
Ground contact pressure less tools is 4.0 to 5.2 psi. *  
The unit will negotiate a 75% grade with the 125HP engine. *  
   
CARRIER BODY  
The carrier body is constructed from structural steel members and 1/8" safety tread deck plate.  
One tool box is provided on the right side of the carrier. Two toolboxes and a 5FT rod rack are provided on the left side of the carrier.  
An auger storage area is furnished at the front of the carrier.  
Fenders are provided over and on the inside of the tracks.  
Optional rod storage and additional toolboxes and/or auger racks are available.  
   
OPTIONAL CARRIER WINCH  
A 20,000lb carrier winch is furnished including wire rope and roller guides which allow for winching the carrier in either a forward or reverse direction.  
   
    * - Depends on options  

copyright @ 2010 Diedrich Drill, all rights reserved