DIEDRICH D-50 DRILL

                  
 D-50  with a 115 HP John Deere 275 cu.in. 4-cyl turbo-charged diesel engine
Cold weather start for diesel engine
*includes two-section hydraulic pump and 13" clutch
Basic Unit includes:
Heavy-duty universal joint with 1-5/8" or 2" hex conn   
Heavy-duty triple strand No.80H chain-driven rotary box, running in 90 wt. gear oil
3-1/2" ID open spindle
Hydraulic oil cooler
Split bushings (quick change) on feed cylinders
Choice of standard paint colors
Drill engine hour meter, oil-amp-temp gauges
Lockable battery box
OPTIONAL EQUIPMENT
LOW OVERHEAD CLEARANCE FEED FRAME
                  Feed frame and sheave mount
MAST (includes quick disconnect)

                  18 ft from base of frame to sheave

                  21 ft from base of frame to sheave Heavy Duty

                  Hinged sheave assembly

                  Underside sheave

CATHEAD     -    8" diameter
HOIST (includes cable)

                  Hydraulic (w/brake) 2000# capacity

                  Hydraulic (w/brake) 3000# capacity

                  Hydraulic (w/brake) 5000# capacity

                  Hydraulic (w/brake) 6000# capacity

                  Hydraulic (w/brake) 7000# capacity

                  Hydraulic (wireline) 900# capacity
                  Hydraulic 6000# with brake release
HYDRAULIC SLIDE BASE
HYDRAULIC SIDE TO SIDE SLIDE
WATER PUMP ASSEMBLY

                  Moyno 3L6 (w/2-speed motor)

                  FMC L0918 (425)
                  SP40 Hose Pump
                  Standpipe
WATER TANK
                  250 gal. capacity
                  500 gal. capacity
                  Luggage rack on top of water tank
HYDRAULIC LEVELING JACKS
                  4" X 36" stroke
                  2 rear
                  1 front (requires front frame extension and stationary grill)
                  1 front - tilt jack with HD bumper(requires front frame extension)
HYDRAULIC ROD HOLDER & BREAKOUT WRENCH
                   NW rod to 6" casing
 
AUTOMATIC SPT HAMMER (guide tube mount)
AUTOMATIC SPT HAMMER(Side Cylinder Mount)
 
DRILL PLATFORM   -   includes running lights and reflectors
                                        (2) underbody tool boxes L & R
                                        (2) above deck auger and rod racks L & R
                                        (1) underbody 10 ft. rod box & tool storage
                    for 84" CA trucks
                    for 102" CA trucks
                    for 108" CA trucks
                    for 120" CA trucks
                    One underbody auger rack and one large tool box in place of                        standard tool boxes (3-1/4, 4-1/4, or 6-1/4 HSA)
                    Two underbody auger racks in place of standard tool boxes                       (3-1/4,4-1/4, or 6-1/4 HSA)
                    Rod rack under water tank
                    Drillers step
                    Vertical drop hammer rack
                    Manual hinged underbody auger rack in place of tool box
                    Bulkhead
                    Tool box 24"
                    Tool box 36"
                    Tool box 48"
SKID
SKID WINCH   - 12000# capacity
TRAILER   - 2-axle, 4 wheels, 14000# capacity
TRAILER   - 2-axle, 4 wheels  18000# capacity
SPINDLE ADAPTER (purchased with new rig)
                      Upper (NWJ/4-1/4" Box/NWJ)
                      Lower (4-1/4" Pin/U-joint/1-5/8"Hex)
OPTIONAL SAFETY FEATURES AVAILABLE
CATHEAD BRAKE
CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent No. 5,647,442)
DRILLERS SAFETY BARRIER(U.S Patent No. 5,360,072)
ALTERNATE SPINDLE MOTOR(U.S. Patent No, 5,524,713)

 

copyright @ 2010 Diedrich Drill, all rights reserved