DRILL RODS

Couplings (below)

 

       In keeping with the high standard of quality expected from a Diedrich Drill product, our drill rods and couplings are no exception. All drill rod products are manufactured from a Cold Drawn, high carbon steel tubing which is equal to or exceeds the minimum tensile strength required by the DCDMA standards. Use of this high quality steel assures a product that will withstand drilling and driving under the most severe conditions. There is 100% inspection of all threads during the manufacture of drill rod and drill rod couplings. As required, all thread specifications on drill rod and drill rod couplings meet the thread standards set by DCDMA and will therefore interchange with products manufactured by other DCDMA members.

       Drill rod couplings are made of AISI 4140 alloy steel and are heat treated to assure durability. Drill rod may be purchased in stock sizes of 1 ft., 2ft., 5ft., and 10ft. Many other lengths are available to meet specific drilling needs.                        

 

DRILL ROD SPECIFICATIONS - OLD SERIES

SIZE OF DRILL ROD E A B N
Outside Diameter 1-5/16" 1-5/8" 1-7/8" 2-3/8"
Wall Thickness 1/4" 1/4" 5/16" 3/16"
Bore Of Coupling 7/16" 9/16" 5/8" 1"
No. Threads Per Inch 3 3 5 4

DRILL ROD SPECIFICATIONS - "W" SERIES

SIZE OF DRILL ROD EW AW BW NW AWJ BWJ NWJ
Outside Diameter 1-3/8" 1-3/4" 2-1/8" 2-5/8" 1-3/4" 2-1/8" 2-5/8"
Wall Thickness 7/32" 1/4" 3/16" 3/16" 3/16" 3/16" 3/16"
Bore OF Coupling/Pin 7/16" 5/8" 3/4" 1-3/8" 5/8" 3/4" 1-1/8"
No. Threads Per Inch 3 3 3 3 5 5 4

 

                       DRILL RODS
Description Length(Ft) Part No.
EW 1 A-9
2 A-10
2.5 2.5FTEW
3 3FTEW
5 A-11
10 A-12
AW 1 A-13
2 A-14
2.5 2.5FTAW
3 3FTAW
5 A-15
10 A-16
BW 1 A-17
2 A-18
3 3FTBW
5 A-19
10 A-20
NW 1 A-21
2 A-22
3 3FTNW

5

A-23

10

A-24
N 1 A-37
2 A-38
3 3FTN
5 A-39
10 A-40
N-3 1 A-37-3
2 A-38-3
3 3FTN-3
5 A-39-3
10 A-40-3
AWJ 1 A-50
2 A-51
2.5 2.5FTAWT
3 3FTAWT
5 A-52
10 A-53
BWJ 1 A-70
2 A-71
5 A-72
10 A-73
NWJ 1 A-60
2 A-61
2.5 2.5FTNWT
5 A-62
10 A-63

 

COUPLINGS

PART NO. DESCRIPTION WEIGHT(lbs)
A-1 E ROD CPLG .6
A-2 A ROD CPLG 1.5
A-4 N ROD CPLG 4.0
A-4-3 N-3 ROD CPLG 3.6
A-5 EW ROD CPLG 1.0
A-6 AW ROD CPLG 2.0
A-7 BW ROD CPLG 4.0
A-8 NW ROD CPLG 5.5

copyright @ 2010 Diedrich Drill, all rights reserved